5 Power Saw Safety Tips

Power Saw Safety Tips

Introduction

When you work in construction, you start to see around you some people with missing fingers and thumbs. If you have used power tools every day and still have all of your fingers and no other serious injuries, you are surely a blessed person. It is a simple fact that power tools run at thousands of rotations per minute and an accident could happen much faster than your reaction time to get your body out of the tool’s reach. This is why these 05 power saw safety tips are so important like the table saw safety.

If you think that working safe equals working slow, think about your working speed while healing an injury and your life after that.

You see, knowing about the cabinet table saw reviews or tile saw reviews are not enough. Well, they are important but we often ignore the important topics at times. That’s not going to happen in this article. Here, we will know power saw safety tips so that we can take safety measures against possible injuries

Power Saw Safety Tips You Can Follow

Astable saws are long-term used equipment’s, problems may occur at any moment. Here, we would like to present some safety tips for taking precautions.

01- Stationary power saw installed properly on the floor

The table saw is the most commonly used stationary power tool during your woodworking activities. And it should be very stable on the ground and level. The risk here is higher on job sites because everything tends to be more improvised and temporary. However, the vast majority of woodworking incidents happen around table saws.

Other than cutting fingers with the exposed spinning blade, the possibility of ‘kickback’ is very real and high. When a table saw is used improperly and the user’s body is in a bad position, a piece of lumber can get pinched between the blade and the table saw fence and get kicked back at you in an instant. That could cause you serious injuries that could change your life for the worse in an instant.

02- Portable power use with full control

Ensuring power tool control is best achieved in two ways. First, before starting to operate your best scroll saw, visualize your entire range of motions and the complete procedure. It only takes a moment, but it helps you foresee and avoid potential problems. Second, and just as important, check your other hand. Where is it? It is safe from harm? Is it on the blade path?

Being aware of what you plan to do with the tool and where your other hand is throughout the entire procedure is the simplest way to ensure control of the tool and to avoid an accident. Plan ahead, instead of following motions automatically. It is almost a mindfulness exercise because you need to be 100% present in the moment and aware of what you are doing. If your mind wanders about unpaid bills, a spousal argument, children’s issues at school, or anything else, you increase your hazard potential multiple times.

03- Proper workplace lighting

Good visibility is critical to a safe workplace. Natural light is the best alternative for your eyes because it offers a complete light spectrum, from all angles. (Plus, it is free, which always helps.)

You should also plan for not having natural light, even if you don’t plan on working evenings. Sometimes a tool will cast a shadow over your workpiece, or there is a dark spot next to where a stationary tool sits. To avoid that, you should first plan where your tools will sit, and then plan the lighting placement and types accordingly – a table saw tabletop requires more lighting than the outfeed table, a drill press, and a scroll saw only need focused task lighting, and so on.

04- Keep your blade sharp

This is the most underrated woodworking tip. Using sharp tools works both for safety and accuracy. Dull edges slow down your work, damage your project, force your power tool motors, and make you apply extra pressure improperly in order to finish the cut. On the other hand, using sharp blades and tools to ensure optimal performance, faster work, and safer operation.

05- Dress appropriately

This tip goes in two directions. First of all, it concerns your clothing. You should only wear will-fitted clothing when working with power tools. You should also remove all jewelry prior to start the power tool operation. Long hair should be tied. When you wear loose items, you are adding a hazard risk to yourself because long sleeves or jewelry hanging can get tangled in the tool.

Second, you should wear safety gear at all times. Eye protection is mandatory, and if you are a Norm Abram fan, you are probably familiar with his safety warnings about wearing safety glasses. While he doesn’t mention earplugs, dust masks, safety shoes, helmets, or gloves, these are also some of the personal protection equipment that you should also consider depending on the type of power tool you are planning to use.

Your power tool manual will provide you with insight on what is necessary for the safest operation and optimal performance, so follow the instructions and you will always be well-protected against these hazards.

Bonus- Ensure proper power supply

For the average hobbyist, a 110V supply is more than enough. When you start operating bigger and beefier power tools, however, you probably need to install 220V. You will also need to ensure your electrical system can deliver enough amperage to feed power to your tools.

Ideally, you will want each power tool being fed from a single, separate circuit breaker. If this is your case, make sure to label and learn which circuit breaker feeds which outlet.

Conclusion

Working with your hands provides a sense of accomplishment that can rarely be experienced by someone who pushes papers or works in front of a computer in an office the entire day. It also pays a reasonable amount of money early on in your professional life without generating a single dime of college debt.

However, operating power tools on a daily basis present an increased hazard risk for the tool operator. You could inhale sawdust, a wood fragment could fly off the spinning blade and hit you in the eye, you could cut yourself, or even cut off a finger. This is why you need to be mindful of your environment, the tool you are operating, the range of motions you intend on performing, and the result you want to accomplish. Follow these power saw safety tips and you are well on your way towards that and much more.

Show Buttons
Hide Buttons