How to Sharpen a Table Saw Blade

Introduction

How to Sharpen a Table Saw Blade

It’s very natural when a table saw lost its sharpness and becomes blunt to use. Many of us have a common tendency to change it that time. If we know how to sharpen a table saw blade, it’s becomes easier for us.

In this article, we are willing to share some ideas with you to implement. Hope, it will be a great help of you at your needy time. If you want you can also know about how to clean a table saw blade here.

Steps to Follow to Hold Sharpness of a Table Saw Blade

Working with a dull tool is not expected at all. It can bring negative consequences and creates unsatisfactory results at the end. Below I am going to show you the must to follow directions to apply to expand ultimate sharpness of the table saw blade.

1. Prepare the Blade Properly

First of all, it requires making the blade prepared precisely for the procedure. Take the first step by using a brush to clean the dirt from the teeth of the blade. If any pieces by any how stuck on it, you can get rid of that too.

Consequently, use some Vaseline on the table saw and let it remain like this for half an hour. Gradually, it softens the grime. Additionally, you can use a wire brush to clean it properly. Position the blade teeth to the right in to it to make it sharper than ever.

2. Removing the Blade from Its Position

Now it’s the prime time to have a precious replacement of the blade of the saw. After removing it, place it on the flat surface. That doesn’t mean you are free from all dangers. Still some safety measures are to be taken.

3. Safety Precautions

While placing the saw blade, accidents can happen in any time. Cover your hands with hand gloves to protect your fingers from sudden cut. As new blade is sharp, possibilities are on the rise to pierce your skin.

While working, something splinters can fly on your eyes and creates dangerous consequences. It can make you blind too. Wearing goggles will be safe for you in that case.

Wear a facemask to avoid extreme metal splinters that might cause severe attack on face.

4. Sharpening the Blade

In this portion of the article, have a close attention. This process takes a bit of time. Use a sharpening handheld file to expand the sharpness of the blade. In this case, concentrate on the bottom of the teeth to be sharpened enough.

Just going backward and forward while sharpening is mandatory. Otherwise, it will end up resulting blunt as well. Once, it is done, clean the residue from it.

Then you should apply lubricating oil. It’s necessary to get rid of unwanted rusting.

Let’s Watch a Video!

Conclusion

We at hope you must learn how to sharpen a table saw blade. These simple steps are it becomes to follow and useful too. This will save your money from buying another saw blade when it is blunt. If you have any query, just let us know it in comments. And if you want to know more like Grizzly G1023RL review, Jet 708675PK XACTASAW review, Delta 3HP Motor UNISAW review or so on, you can check that out also…

Comments (18)

  1. Jim February 15, 2019
  2. Ulrich February 16, 2019
  3. Lottie February 16, 2019
  4. Ben February 16, 2019
  5. تسديد قروض February 18, 2019
  6. Buddy February 18, 2019
  7. Vince February 19, 2019
  8. book February 23, 2019
  9. Ginger February 23, 2019
  10. Ryan February 23, 2019
  11. Cheri February 23, 2019
  12. Mena February 26, 2019
  13. تسديد قروض February 28, 2019
  14. Carlos March 1, 2019
  15. oline March 3, 2019
  16. cahat March 4, 2019
  17. linhkien March 4, 2019
  18. Chean March 5, 2019

Leave a Reply

Show Buttons
Hide Buttons